HelitechOnline Logo

Sill Plate

Sill plate replacements: Material selection and installation methods

The sill plates, structural beams that lay where your concrete foundation meets the framing ofyour home, are prone to rotting and failure if not properly installed and maintained.

Your sill plate is what anchors your home to your foundation. The correct, rot-resistant wood must be used to prevent wood rot, leaks and foundation problems. And your sill plate installation must be performed carefully to ensure your sill plate is securely attached to the foundation.

The sill plate is usually the first part of your flooring system to become subject to rot, but canquickly spread outward to your joists and vertical structural beams. Since your sill plate bears the compressive load of your home’s above-ground structure, wood rot can cause your sill tocollapse.

This is why it is important to call a sill plate replacement contractor at the first sign of rot orstructural damage. Sometimes, all we’ll need todois fill the gaps with a foam sealant. Other times, your home will require a complete sill plate replacement.

At Helitech Waterproofing & Foundation Repair, we offer free consultations and estimates tohomeowners like you. We’ll give you a fair and accurate estimate of the work it will take to get your home back into shape. We’ve been fixing foundations and performing sill plate installations for 30 years now, so you’ll know you’re getting some of the best repair service in the Midwest.

Here’s what a common sill plate replacement looks like:

  1. Install temporary supports
    First, we’ll install temporary supports to allow access to the sill plate for removal.
  2. Measure twice, install once
    Your sill plate must be precisely installed tobe flush against the foundation. All gaps provide space for water to leak through into your foundation walls and structural beams, diminishing the structural integrity of your home.

Rotten sill plates can lead to structural and foundation damage to your home.

Call the sill plate replacement experts today.

Common mistakes that lead to rotting sill plates and foundation problems

There are very specific guidelines as to how your sill plate should be installed. And if these guidelines are not followed, your home is vulnerable to wind uplift during storms and your sill plate is vulnerable to wood rot.

If your home was built prior to 1990, it is likely that non-treated wood was used in your sill plate installation, which can lead to premature wood rot. Nowadays, pressure-treated cedar or redwood is often recommended due to its rot- and water-resistant qualities. As an additional precaution against rot, sill plates must be installed about half a foot from the finished grade of your home to prevent the ground from soaking the sill plate, leaking into the house or promoting wood rot.

Sill plate gaskets—a material used to prevent air infiltration—must be placed between the sill plate and the concrete of your foundation. Your sill plate gasket serves two crucial functions:

  1. creating an air-tight seam between the wooden sill plate and
  2. protecting your sill plate from absorbing moisture from your concrete foundation.

In some cases, the sill plate is embedded directly into the concrete. This can, however, lead to premature rotting of your sill plate, so it might not be the best sill plate replacement or installation method.

The anchor bolts, which secure your sill plate to your foundation, must be installed strategically to prevent wind uplift. Typically, 1/2″ anchor bolts are attached about 8 feet apart, and always within 2 feet of each wall corner. In some areas, though, anchor bolts may be installed further apart or closer together—it depends on the area in which you live.

We’ll give you, the homeowner, a free quote for your sill plate replacement.

We’ll get back to you with a cost-effective solution.



Download, print, or save one of our many product and installation brochures so you can learn more about our company, our available products and services, and the steps taken to heal your home.

Maintenance Guides

Our Homeowner Maintenance Checklist will serve as your plan for regular maintenance – particularly as it relates to foundation issues, concrete settlement, and structural repair. It is intended to be used all-year round and will help you ensure your home is healthy and protected through every month and season.

Video Library

With our installation and product videos, you will be able to better understand our processes and visualize the installation so you can have a higher level of comfort in trust with us to heal your home.

General Construction Case Studies